From Southside warehouses to Stone Oak garages, we install epoxy and polished-concrete floors engineered for Texas heat, hot-tire pickup, and nonstop traffic. One dedicated crew owns your prep, coating, and finish - start to finish, on schedule.
Every floor is poured, ground, and coated by ProEpoxy's own San Antonio crews - never subbed out. Here's the work we do most across the metro, and the systems we reach for on each.
Turn a hot, dusty San Antonio garage into a clean, showroom-grade space. Our flake and metallic systems shrug off hot-tire pickup, oil drips, and summer heat soak - with 50+ color blends to choose from. Most single and double garages are done in a day, ready to drive on that weekend.
Learn more
Warehouses off I-35, distribution centers, machine shops, and manufacturing floors take a beating - forklift traffic, dropped tools, coolant and solvent spills. We spec high-build epoxy and urethane systems that hold up for 20+ years and keep your operation running with phased, off-hours installs.
Learn more
Polished concrete is the workhorse floor for San Antonio retail, breweries, and open-plan offices - no coating to peel, just your slab densified and ground to a satin or mirror sheen. It laughs off scuffs and rolling loads, needs nothing but a dust mop, and keeps interiors cooler by bouncing light around.
Learn more
We don't sell buckets and wish you luck. ProEpoxy is a full-service installer - our own trained crews handle moisture testing, diamond prep, coating, and the final walkthrough on every single job.
A floor is only as good as the prep under it. Here's the exact 5-step sequence our crews run on every San Antonio job, whether it's a two-car garage or a 60,000 sq ft plant.
We calcium-chloride and RH test for moisture, then open the slab with diamond grinders or shot blast for a mechanical bond that lasts.
Spalls, cracks, and control joints get chased out and filled with rapid-set polymer mortar so the finished floor reads flat and seamless.
A deep-penetrating primer locks into the profiled slab - and doubles as a moisture-mitigation layer when the slab needs it.
Build coats go down to spec thickness - this is where broadcast flake, metallic pours, or solid-color builds take shape.
A UV-stable topcoat seals it all in, then we walk the floor with you against a 12-point checklist before we hand over the keys.
Thirteen crews, all on our own payroll, working every corner of the metro from downtown to Boerne. No brokers, no subs, no mystery hands on your floor - just the same team that quoted the job.
Start Your Project →The kinds of San Antonio floors we coat every week
"We run forklifts across this floor 16 hours a day. ProEpoxy knocked out our 8,000 sq ft warehouse over a weekend, and a year in there's not a single chip or hot-tire mark. They actually did the prep right."
"Our three-car garage went from stained concrete to a charcoal metallic floor that honestly looks better than the renderings. Two San Antonio summers later it hasn't yellowed or lifted at the edges. Worth every penny."
"They polished 3,200 sq ft of concrete in our dining room between closing and reopening - no dust, no drama. Guests ask about the floor all the time, and all we do to keep it up is dust-mop it. Ahead of schedule, too."
Our trucks roll from downtown out to the Hill Country and the I-35 corridor - covering Bexar County and the surrounding communities below. Most jobs kick off within about a week of your free walkthrough.
Describe your space - warehouse bay, garage, kitchen, or shop floor - and a local San Antonio crew member will come out, assess the slab, and hand you a written fixed price. Most walkthroughs happen within three business days.